Click to Print Page       Performance Results   GVP-C400 GVP-S350 GVP-S200 Solar Transmittance 80 50 53 Solar Absorptance 14 44 40 Solar Reflectance 6 6 6 Visible Light Transmission 90 31 33 Visible Light Absorptance 2 64 62 Visible Light Reflectance (Exterior) 8 5 5 Visible Light Reflectance (Interior) 8 6 6 Emmissivity 0.91 0.86 0.87 U-Value (Summer) 1.08 0.96 0.97 U-Value (Winter) 1.14 1.03 1.04 Shading Coefficient 0.97 0.74 0.75 Solar Heat Gain Coefficient 0.83 0.65 0.66 UV Transmittance (300-350 Nanos)% <2 <2 <2 Total Solar Energy Rejected 17 36 35 Physical and Thermal Properties   GVP-C400 GVP-S350 GVP-S200 Tensile Strength ASTM D 882 (PSI) 30,000 30,000 30,000 Elongation At Break ASTM D 882 (%) 160 160 160 Yield Stress (5%) ASTM D 882 (PSI) 15,750 15,750 15,750 Break Strength (lbs./in.) 122 122 122 Yield Strength (5%) (lbs./in.) 64 64 64 Tear Strength ASTM D 1004 Graves Tear Test (Initial) 6.8 6.8 6.8 Tensile Modulus ASTM D 882 (PSI) 558,000 558,000 558,000 Puncture Strength ASTM D 4830 (lbs.) 71 71 71 Peel Strength (grams/inch of width) 3,300 3,300 3,300 Poisson's Ratio ASTM D 882 0.40 0.40 0.40 Abrasion Resistance (%) ASTM D 1003-92 ASTM D 1044 100 Cycles <5 <5 <5 ANZI Z 97.1 Pass Pass Pass CPSC CFR 1201, Category II Fail Fail Fail GSA Security Criteria Performance Condition Daylight Application (4 PSI / 28 PSI/msec) 3b 3b 3b BS 6206, Class C Pass Pass Pass Flame Spread Index ASTM D 882 2 2 2 Smoke Index ASTM D 882 31 31 31 Flash Temperature (°F) ASTM D 1929 735 735 735 Combustion Rate NEGLIGIBLE NEGLIGIBLE NEGLIGIBLE Melting Point (°C) 263 263 263 Self Ignition (°F) ASTM D 1929 755 755 755

Notes: This test data contains results arrived at only after employing specific test procedures and standards. The included data does not constitute a recommendation for, endorsement of, or certification of the product or material tested. This data is provided for informational purposes only. ShatterGARD Safety & Security Window Films, Inc. makes no representation or warranty, expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose, that its products will conform to these test data. Extrapolation of data from the sample or samples relating to the batch or lot from which data were obtained may not correlate and should be interpreted accordingly with caution. ShatterGARD shall not be responsible for variations in quality, composition, appearance, performance, or other feature of similar subject matter produced by persons or under conditions over which ShatterGARD has no control. Performance results were generated from testing 1/8" (3mm) thick clear glass and are subject to variations within industry standards.

Click to Print this Page